/Products/replacement of fine aggregate with copper

replacement of fine aggregate with copper

(PDF) A Study on Effective Replacement of Fine Aggregate

Use of copper slag in the concrete industry as a replacement for cement and/or fine aggregates can has the benefits of reducing the costs of disposal and helps protecting the environment. 3) Copper slag: Copper slag is a by-product material produced from the process of manufacturing copper.

A Study on Effective Replacement of Fine Aggregate using

A Study on Effective Replacement of Fine Aggregate using Copper Slag M. R. Amarnaath S. Jaya Pradeep UG Student UG Student Department of Civil Engineering Department of Civil Engineering Knowledge Institute of Technology Knowledge Institute of Technology R. A. Kavin P. Dinesh

(PDF) Partial Replacement of Copper Slag as Fine Aggregate

The optimum value which provided the best performance was at 50% addition of copper slag for compressive strength. The concrete was prepared for the M20 grade concrete with partial replacement of fine aggregate by copper slag with various percentages of (0%, 5%, 10%, 20%, 30%, 40% and 50%).

Experimental Study on Glass Fibre Reinforced Concrete with

glass fibre reinforced concrete beam with copper slag as a partial replacement of fine aggregate. The parameters of the study included by replacing the fine aggregate by copper slag with 50%, 60%, 70% and by varying the volume fraction of glass fibre from 0 to 0.1% with an increment of 0.025%. The grade of concrete is M35.

(PDF) A Study on Effective Replacement of Fine Aggregate

Use of copper slag in the concrete industry as a replacement for cement and/or fine aggregates can has the benefits of reducing the costs of disposal and helps protecting the environment. 3) Copper slag: Copper slag is a by-product material produced from the process of manufacturing copper.

A Study on Effective Replacement of Fine Aggregate using

A Study on Effective Replacement of Fine Aggregate using Copper Slag M. R. Amarnaath S. Jaya Pradeep UG Student UG Student Department of Civil Engineering Department of Civil Engineering Knowledge Institute of Technology Knowledge Institute of Technology R. A. Kavin P. Dinesh

Use of copper slag as a replacement for fine aggregate in

The use of copper slag as a replacement for fine aggregate in construction will reduce damage to the environment due to the waste resulting from the copper manufacturing process and help in saving natural resources. In this research, the use of copper slag as a replacement for fine aggregate is investigated.

Experimental Study of Partial Replacement of Fine

Copper slag and fly ash replaced in the ratio 20%, 40%, 60% and 10%, 20%, 30% by weight of fine aggregate and cement in concrete. This study showed that strength increases with increasing amount of copper slag and fly-ash up to an optimum value, beyond which strength starts to decrease with further addition of copper slag and fly ash.

Study of the Properties of Concrete Containing Copper Slag

replacement of copper slag as a fine aggregate fine Fig.5. Compressive strength for various replacement percentage of copper slag in concrete. 3.3 Rapid Chloride Ion Permeability Test Results (RCPT) For normal concrete, the average charge passed was found to be 950.5 coulombs and for copper

Influence of the replacement of fine copper slag aggregate

Copper slag (CS), the metallurgic slag of the copper industry, has demonstrated very promising potential as an aggregate for application in the concrete industry.

Influence of Copper Slag in Concrete as Partial

copper slag by replacing natural fine aggregate at different percentage like (0%, 20%, 40%, 60%, 80%, and 100%). B. Objective of the Investigation 1) The use of copper slag in the concrete as a replacement for fine aggregate, reduces the costs of disposal, lowers the cost of the concrete and also helps in protecting the environment.

REPLACEMENT OF FINE AGGREGATE WITH JAROFIX IN

concrete using copper slag for the partial replacement of fine aggregate and were found that 30% fine aggregate can be replaced effectively. Further, Patil and Patil[16] studied the workability, compressive strength, split tensile strength and permeability in M30 concrete replacing fine aggregate by copper

Study on the partial replacement of fine aggregate using

manufactured sand, crushed glass, copper slag, recycled aggregates, fly ash aggregate, steel slag etc. The use of replacement of fine aggregate using induction furnace slag. There are 5 different mixes using induction furnace slag with 20%, 30%, 40 %, 50% and 60 % replacements of fine aggregate.

Study on Strength of High Performance Concrete by Partial

refinery plants, has low cost and its application as a fine aggregate in concrete production reaps many environmental benefits such as waste recycling and solves disposal problems. Copper slag possesses mechanical and chemical characteristics that qualify the material to be used in concrete as a partial replacement as fine aggregate.

Effect of copper slag as fine aggregate replacement in

Jan 01, 2019 In the first phase, the fine aggregate is replaced with copper slag in different percentages of 20%, 40%, 60%, 80%, and 100%. In the second phase, the cement is replaced with different percents of Nano silica i.e. 1%, 2% and 3%.Mix proportions of this

Partial Replacement of Copper Slag as Fine Aggregate

concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15% and 20%. The specimens were casted for 7days, 14 days and 28 days then tested. The results are presented above. V. REFERENCES [1] Al-Jabri, K. and Makoto Hisada. “Copper slag as sand

Partial replacement of Fine aggreggate by Copper Slag and

Jan 16, 2017 5. 5 Replacement Of Fine Aggregate By Copper Slag And Cement By Fly Ash Ammini College Of Engineering, Mankara, Palakkad Copper slag also gained popularity in the building industry for use as a fill material. Unlike many other film materials, copper

(PDF) Partial Replacement of Copper Slag as Fine Aggregate

Abstract and Figures. this project present the usage of copper slag for the partial replacement for fine aggregate the experimental procedure is conducted for the replacing percentage of 10%,15%

A Study on Effective Replacement of Fine Aggregate using

A Study on Effective Replacement of Fine Aggregate using Copper Slag M. R. Amarnaath S. Jaya Pradeep UG Student UG Student Department of Civil Engineering Department of Civil Engineering Knowledge Institute of Technology Knowledge Institute of Technology R. A. Kavin P. Dinesh

(PDF) A Study on Effective Replacement of Fine Aggregate

Use of copper slag in the concrete industry as a replacement for cement and/or fine aggregates can has the benefits of reducing the costs of disposal and helps protecting the environment. 3) Copper slag: Copper slag is a by-product material produced from the process of manufacturing copper.

Effect of copper slag as fine aggregate replacement in

Jan 01, 2019 In the first phase, the fine aggregate is replaced with copper slag in different percentages of 20%, 40%, 60%, 80%, and 100%. In the second phase, the cement is replaced with different percents of Nano silica i.e. 1%, 2% and 3%.Mix proportions of this

Influence of the replacement of fine copper slag aggregate

Copper slag (CS), the metallurgic slag of the copper industry, has demonstrated very promising potential as an aggregate for application in the concrete industry.

COPPER SLAG IN CONCRETE AS REPLACEMENT MATERIAL

copper slag as a replacement for fine aggregate at constant workability and studied the effect of super plasticizer addition on the properties of High Strength Concrete made with copper slag. They observed that the water demand reduced by about 22% for 100% copper slag replacement. The

Effects of Copper Slag as a Replacement for Fine Aggregate

Abstract: Use of copper slag (CS) as a replacement for fine aggregate (FA) in RC slender columns was experimen- tally investigated in this study. Twenty columns measuring 150 mm x150 mm x 2500 mm were tested for monoto- nic axial compression load until failure.

REPLACEMENT OF FINE AGGREGATE WITH JAROFIX IN

concrete using copper slag for the partial replacement of fine aggregate and were found that 30% fine aggregate can be replaced effectively. Further, Patil and Patil[16] studied the workability, compressive strength, split tensile strength and permeability in M30 concrete replacing fine aggregate by copper

Behaviour and Experimental Study on Concrete as Partial

0% replacement of copper slag 10% replacement of copper slag 20% replacement of copper slag 30% replacement of copper slag Cement 14.454 kg 14.454 kg 14.454 kg 14.454 kg Fine aggregate 27.8358 kg 25.05222 kg 22.26864 kg 19.48506 kg Copper slag 2.78358 kg 5.56716 kg 8.35074 kg Coarse aggregate(20mm,12mm)

Comparison of The Replacement of Natural Sand by Copper

concrete can be improved by partial replacement of fine aggregate with copper slag and was found that 60% replacement gives optimum results.J. Ramesh Kumar, K. V. Ramana [8] studied on Use of copper slag and fly ash in high strength concrete, given that Concrete mixes were tested for workability, density, compressive strength, tensile

Study on the partial replacement of fine aggregate using

manufactured sand, crushed glass, copper slag, recycled aggregates, fly ash aggregate, steel slag etc. The use of replacement of fine aggregate using induction furnace slag. There are 5 different mixes using induction furnace slag with 20%, 30%, 40 %, 50% and 60 % replacements of fine aggregate.

SCOPE OF REPLACING FINE AGGREGATE WITH COPPER SLAG

Jan 27, 2016 Srinivas and Muranal (2015) Study of the properties of concrete containing copper slag as a fine aggregate. The researchers concluded that the workability was increase up to 31.57 for 100% replacement of copper slag as a fine aggregate. The

Copper or ferrous slag as substitutes for fine aggregates

replacement of fine aggregates with up to 50% copper slag showed an improvement in the strength properties, modulus of elasticity, creep and shrinkage. It was reported that the addition of copper slag did not affect the durability properties of concrete except its acid resistance. Al-Jabri . et al.

Experimental Study on concrete using Copper Slag as

material for fine aggregate in concrete. 2. To debrief the physical and chemical properties by use of copper slag for fine aggregate in concrete specimens. 3. To inspect the performance of concrete made with copper slag as replacement of fine aggregate. 4.

Copper Slag Partially Replaces Fine Aggregate in M 25

partial alternative for fine aggregate where its world annual generation is about 33 million tonnes. The project look through the use of copper slag as partial replacement to M sand and natural sand for the designed M 25 grade mix concrete. compressive strength